Drill Sleeves Item Code: NEDS-XXDescription: Manufactured from Carbon Steel & available in both soft as well as hardened type. Available in workshop grade ( Unhardened ground externally & reamered internally) & A grade ( Hardened ground internally and externally). To be used to adapt smaller MT shank tools to larger machine spindles. The concentricity & taper angles …
3 Inches (75 mm) Rotary Table -3 Slots Item Code: NERT-75.3Description: A Precision Small Rotary Table for Milling operation with Table Diameter – 3 Inches (75 mm) with 3 slots. Height – 47 mm Worm- Gear Ratio – 36:1, which basically means that 1 handle rotation shall turn the table by 10 Degrees. Table graduated in 360 Degrees …
Slitting Saw Holder-R8 Item Code: NESSH-R8Description: The spring loaded head readily accepts saw blades from 1/2″ till 1″. The blades are firmly secured in position with Hex head screw. Rust resistant black oxidised finish in R8 Shank. Slitting Saw Holder-Straight Shank 1/2 Inch Item Code: NESSH-STDescription: Mounted easily on a collet chuck or any other …
Fly Cutter Holder with HSS Bit Item Code: NEFCH- XXDescription: An excellent quality product for boring through the holes & is manufactured from Fine quality tool steel. Supplied in ground finish & with HSS tool bit Prod. Code Head Dia. Tool Bit Drawbar Shank’s Thread NEFCH-2MT.I 1-1/2″ 1/4″ Sq Tapped 3/8″ NEFCH-2MT.M …
Collet Adaptors for E Type Collets Item Code: NECA-XXXDescription: Very Precise Item made of Tool Steel. Fully Hardened & Ground. Comes with a C- Spanner’ Below table is for Drawbar thread type adaptors but we do have same available in Teng type shanks as well. Prod. Code Collet Type Morse Shank Dia. Nut Drawbar …
Adjustable Swivel Angle Plate Item Code: NESAP-XXDescription: Manufactured from High Grade Casting. The Table can swivel from 0 -90 Degrees & can be locked at any angle with the help of screws at each end. Graduated in Degrees. Precisely ground on all working faces. Tee-slots are machined for a clean, precise & better finish. Prod. …
50 mm Small Milling Chucks-4 Jaw Item Code: NESMC-50.4Description: A very Small but high Quality 4 Jaws Self centering and Independent chuck, where Jaws are hardened & ground. Same Jaws are reversible as wells Supplied with a mounting back plate & fixing tee nuts with screws. (though the picture is not showing the same) The Back plate has been drilled in …
Micro Boring Head- 2 Inches (50 mm) Item Code: NEMBH-50.2Description: Micro Boring Head Set Accepts tooling of 1/2 ” (12.7 mm) diameter 1 Div = 0.001 thou Available in MT2/ MT3 / R8 shanks 30 mm Micro Boring Head Item Code: NEMBH-30Description: Head Diameter :30 mm 1 Division : 0.02 mm Has 2 bores to accept …