Tap Wenches

Piloted Type Spindle Tap Wrench

Item Code: NEPTW-110.X

  • Used for threading a drilled hole manually at one machine location, without actually moving the work piece.
  • Tapping accessory for drill presses & lathes.
  • Hardened & tempered jaws.
  • Ensures identical centerline of the tap & the drilled hole.

Prod. Code Tap Capacity (Inches)
NEPTW-110.A 1/16 – 1/4
NEPTW-110.B 1/4 – 1/2
NEPTW-110.S Set of above 2 Sizes

Machine Type Tap Aligner

Item Code: NEMTA-012

  • Provides sensitive feel for hand-tapping small holes on milling machines, drill presses and lathes.
  • Starts with every hole straight and prevents tap breakage.
  • Tap Capacity: 0- 12 mm
  • Shank Diameter : 3/8″
  • Handle Diameter : 1″

T-Type Ratchet Spindle Tap Wrench

Item Code: NERTW-125.X

  • High Precision Tap Wrench with reversible ratchet action by changing the position of upper knob.
  • Jaws are hardened & tempered. 
  • Shiny Ground Finish.

Prod. Code Tapping Capacity
  Inch mm
NERTW-125.A 1/16 – 5/32 1.5 – 4.0
NERTW-125.B 5/32 – 1/4 4.0 – 6.0
NERTW-125.C 1/4 – 1/2 6.0 – 12.0
NERTW-125.S A set of above 3 Sizes

Tap Extensions

Item Code: NEETE-XXX

  • Eliminates needs for expensive, hard to get extension taps.
  • Attractive ground finish with knurled grip chuck.

Prod. Ref Length Tap Capacity
     Inch       mm    
NEETE-185 7-1/4 185  No. 0 to 12 Inch
NEETE-280 11 280  No. 12 to 1/2 Inch
NEETE-2S A Set of 2 Pc. consisting of above.

New Tap Wrench Holds Metric Taps of Sizes 3 – 10 mm

Item Code: NEWMT-310

  • Made from Tool Steel, precisely grounded for a bright nice finish.
  • New Solid Design Tap Wrench, holds Metric Taps of sizes 3 mm – 10 mm ( 1/8″ to 3/8″)
  • Knurled Handle for a better grip.
  • No separate loose jaws like any other ordinary Tap wrench. This will give a better long life to this tool.

3 piece T-Handle Tap Wrench Set

Item Code: NETTW-3S

  • Set of 3 Pieces quality made t-type tap wrenches with hardened & tempered steel jaws.
  • The knurled cap on the jaws gives you the freedom to tighten the jaws to grip the tap, reamer, drill like a vice for a wide variety of applications. 
  • Jaw Opening ranges from  1/16″ to 5/32″, 5/32″ to 1/4″ & 1/4″ to 1/2″ in the 3 pieces set respectively.

Cam Lock T-Tap Wrench

Item Code: NECLTW-312

  • Quality robust design T-Handle Tap Wrench  for handling extreme torque , & principally based on a revolutionary cam lock system.
  • Wide range of Tap holding capacity from 1/8″ to 1/2″ (M3 to M12) through a double size collet inside.
  • Can also be used as a hand drill for sizes 1/8″ – 5/16″


  • Position the T-handle parallel to the body of the tap wrench.
  • Loosen the knurled nut, hold the desired tap & then re-tighten tighten the nut again.
  • Reposition the T-handle 90° to the body as it was during first step, now the cam has locked the tap securely in place., which will never let the tap fall off while working.
  • To take out/ change the tap, just turn the T-handle parallel to the body as done in 1st step and the tap can be released easily.

Ratchet Type Tap Wrench with Interchangeable Heads

Item Code: NERTW-2PC

  • High Quality Ratchet Tap Wrench with Inter- changeable Heads to accommodate different capacities of tap sizes
  • Ratchet action at 3 positions: forward, reverse (backward) & lock (direct) engagement in neutral position
  • Ideal for holding Taps, reamers, screw extractor, or any other such small hand turned tools.
  • Self centering steel jaws provide a positive grip on the holding tool.
  • Ideal to use in confined area with quite ease.
  • Chrome plate body. Excellent finish
  • Size range of 1st Head: M3 to M8 & 
  • Size range of 2nd Head: M5 to M12