Centre Punch Set of 5 Pcs.
Item Code: NECP-5SS
Description:
- Extremely good quality made from fine tool steel, a center punch set of 5 Pcs.
- Hardened & tempered for good performance & long life.
- Knurled body for better grip.
| Prod. | Size of Point | OAL | Square Head Size | |||
|---|---|---|---|---|---|---|
| Code | Inch | mm | Inch | mm | Inch | mm |
| NECP-16S | 1/16 | 1.6 | 4 | 100 | 3/8 | 9.5 |
| NECP-20S | 5/64 | 2.0 | 4 | 100 | 3/8 | 9.5 |
| NECP-24S | 3/32 | 2.4 | 4 | 100 | 3/8 | 9.5 |
| NECP-36S | 9/64 | 3.6 | 4 | 100 | 3/8 | 9.5 |
| NECP-40S | 5/32 | 4.0 | 4 | 100 | 3/8 | 9.5 |
| NECP-5SS | A set of above 5 Punches | |||||
| NECP-32S | 1/8 | 3.2 | 4 | 100 | 3/8 | 9.5 |
| NECP-48S | 3/16 | 4.8 | 4-1/2 | 115 | 7/16 | 11.0 |
| NECP-63S | 1/4 | 6.3 | 5 | 125 | 9/16 | 14.0 |
Long Drive Roll Pin Punch Set of 9 Pcs.
Item Code: NELDRPP-09
Description:
a). Set of 9 Pcs Roll Pin Long Drive Pin Punch Set in capacities- 1/16″, 5/64″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ & 5/16″.
c). Knurled Body for excellent Grip & superb grind finish.
e). Even the finest pin in the set has a half ball round tip which has a very technical application & highlight of this set.
Taper Pin, Parallel Pin & Cheisel Punch Set of 13 Pcs.
Item Code: NETPPC-14
Description:
- Set of 14 Pcs consists of
- 4 Taper Punches: 3/32″ x 5-1/4″, 1/8″ x 5-3/4″, 5/32″ x 6″, 3/16″ x 6-1/4″, 1/4″ x 6-3/4″
- 5 Flat Chiesel- 1/4″, 3/8″, 1/2″, 5/8″, 3/4″
- 4 Pin Punches – 3/32″, 1/8″, 5/32″, 3/16″
- 1 Pc- Centre Punch
Centre Punch Brass
Item Code: NECPB-125
Description:
- 5″ Long & 1/2″ Diameter Brass Automatic Center Punch Spring Loaded Auto Mark Hole with chrome plated tip.
- High tension spring in Body.
- Knurled handle for sure grip.
- Automatically strikes surface with a powerful spring action when pressed.
WAD Punch Set
Item Code: NEWPS-10
Description:
- Made of High Grade Alloy Steel
- Self Centering Holder,
- Interchangeable Punches, which are heat treated to harden & then ground for sharpness and durability which gives you a fine cutting edge
- Ideal to punch holes in Rubber, Felt, Leather, Plastic etc.
- The Punches covers a size range from 5- 32 mm which includes 5,6,8, 10,12.5, 16,20, 25& 32 mm
Letter & Figure Punches
Item Code: NELFP-36.X
Description:
- Made of Carbon Steel
- Individual Set of letter consists of 27 Punches (A-Z) & Individual Set of Figures consists of 9 Punches (0-8 & Same punch for 6~9 as can be used Inverted)
- Combination Sets includes Letter & Figure Punch both.
- Nice auto Black Finish & are supplied in Plastic Case.
| Letter Punch Set | Figure Punch Set | Combination Set | (Inch) | (mm) |
| NELFP1.16 | NEFP1.16 | NELFP1.16 | 1/16″ | 1.6 |
| NELFP3.32 | NEFP3.32 | NELFP3.32 | 3/32″ | 2.4 |
| NELFP1.80 | NEFP1.80 | NELFP1.80 | 1/8″ | 3.2 |
| NELFP5.32 | NEFP5.32 | NELFP5.32 | 5/32″ | 4.0 |
| NELFP3.16 | NEFP3.16 | NELFP3.16 | 3/16″ | 4.8 |
| NELFP1.40 | NEFP1.40 | NELFP1.40 | 1/4″ | 6.3 |
| NELFP5.16 | NEFP5.16 | NELFP5.16 | 5/16″ | 8.0 |
| NELFP3.80 | NEFP3.80 | NELFP3.80 | 3/8″ | 9.5 |
| NELFP1.20 | NEFP1.20 | NELFP1.20 | 1/2″ | 12.7 |
Long Drive Pin Punch Set of 5 Pcs
Item Code: NELDP-05
Description:
- Set of 5 long drive Punches of Pin sizes: 1/8”, 3/16”, 1/4”, 5/16” and 3/8”.
- The working end of the punches are hardened & long enough to reach to deeply set pins in restricted area.
- Carbon steel construction
- Black oxide finish to resist corrosion
- Knurled handle for a better grip.
Short Drive Pin Punch Set of 8 Pcs
Item Code: NESDPP-08
Description:
- Manufactured from fine tool steel.
- Hardened & tempered for long drive & high performance.
- Figer knurled body for better grip.
- Sizes : 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ & 5/16″. Overall Length is 4″ (100 mm) of each Pin
Long & Short Drive Pin Punch Set of 13 Pcs
Item Code: NELSPP-14
Description:
- Set of 5 long drive Punches of sizes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8” & 8 Short drive pin punch set of sizes:1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 7/32″, 1/4″ & 5/16″.
- Carbon steel construction
- Black oxide finish to resist corrosion
- Knurled handle for a better grip.
Set of 2 Automatic Centre Punches
Item Code: NEACP-2
Description:
- Hand Pressure alone will operate this surface impacting & marking device.
- Hardened & Ground Punch Point.
- No Hammer is required.
- Point can be easily removed for re-sharpening or re-placement.
Round Head Center Punch Set
Item Code: NECP-5RS
Description:
- Extremely good quality made from fine tool steel, a center punch set of 5 Pcs.
- Hardened & tempered for good performance & long life.
- Knurled body for better grip.
| Prod. | Size of Point | OAL | ||
|---|---|---|---|---|
| Code | Inch | mm | Inch | mm |
| NECP-16R | 1/16 | 1.6 | 4 | 100 |
| NECP-20R | 5/64 | 2.0 | 4 | 100 |
| NECP-24R | 3/32 | 2.4 | 4 | 100 |
| NECP-36R | 9/64 | 3.6 | 4 | 100 |
| NECP-40R | 5/32 | 4.0 | 4 | 100 |
| NECP-5RS | A set of above 5 Punches. | |||
| NECP-80R | 5/16 | 8.0 | 4 | 100 |
| NECP-32R | 1/8 | 3.2 | 4 | 100 |
| NECP-44R | 11/64 | 4.4 | 4 | 100 |
| NECP-48R | 3/16 | 4.8 | 4-1/2 | 115 |
| NECP-63R | 1/4 | 6.3 | 5 | 125 |
| NECP-95R | 3/8 | 9.5 | 6 | 150 |
Ejecting Drill Drift
Item Code: NEEDD-X
Description:
Description:
- Very useful item for removing taper shank drills from sleeves or sockets.
- Hardened & tempered all over
- Supplied in Black Oxidised Finished.
| Prod. Code | Drift No. | Suitable for Morse Taper |
|---|---|---|
| NEEDD-1 | 1 | MT-1 |
| NEEDD-2 | 2 | MT-2 |
| NEEDD-3 | 3 | MT-3 |
| NEEDD-4 | 4 | MT-4 |
| NEEDD-1234 | 1,2,3 & 4 | 4 Pc.set of Drift 1,2,3 & 4 |
Optical Punch
Item Code: NEOPS-5
Description:
- Layout and Drill Hole Patterns Easily & Accurately
Set Contains:
- Precision Guide Base with scratch protection.
- Two Spotting Lens one with center dot and circle, & other one with cross-hair target. These spotting lens magnify for easy alignment with a mark.
- 60° and 120° Center punches made of hardened tool steel.
- Comes complete in a fitted wooden case
Automatic Center Punch Hand Tool For Metal Punch- Plastic Head
Item Code: NEACP-1CAP
Description:
- Automatic Center Punch
- HSS Steel Pin- Hardned & Ground
- Plastic Head for Easy Grip and Control.
Pen Type Adjustable Force Automatic Centre Punch Tool
Item Code: NEACP-E1
Description:
- For indenting the work-piece prior to drilling without the need for hammering.
- Delivers a punch when hand pressure is applied to knurled head.
- One handed operation.
- Adjustable force up to 13 kgs simply by the knurled Cap on the head.
- Pen Type Holder & Epoxy Black finish for a Rust free life.
- Hardened & Ground Alloy Steel Pin of Hardness 60 +/-2 HRC
- Knurled body for a firm grip to avoid any slippage
- Length: 120 mm
High Quality Automatic Center Punch
Item Code: NEGACP-XX
Description:
Applications:
- DELIVERS A HIGH IMPACT STRIKE – one-handed spring-loaded impact operation, no hammer required
- ADJUSTABLE SPRING TENSION – adjustable spring tension cap for light or heavy strokes and marking
- ALL STEEL 5″ BODY – center punch has an all-steel body, knurled finger grip and rust-resistant black oxide finish,
- STEEL POINT – threaded, replaceable hardened steel point and shaft (*HIGHLIGHT OF THIS DESIGN- WE SELL SPARE TIPS AS WELL)
- AUTOMATIC PUNCH DEPTH – center punch can be set for repetitive work. Ideal for punching, marking, scribing to drill, nail and screw holes.
a/. Heavy Duty Center Punch
- Product Code : AGGACP-HD
- Dimensions : 4-7/8″ Long x 1/2″
- Diameter Point Diameter : 0.055 Inches (1.4 mm )
b/. Medium Duty Center Punch
- Product Code : AGGACP-MD
- Dimensions : 5-5/8″ Long x 5/8″
- Diameter Point Diameter : 0.083 Inches (2.1 mm )