Milling Indexing Kit

Item Code: NESRTD-110
Description:

• Rotary Table Diameter : 110 mm (4-3/8″)
• Table Height: 80 mm (3 -1/8″)
• Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees.
• Centre Bore of the Table MT2
• Table Graduated 360 Degrees. Handwheel graduated in seconds.
• Vernier scale is calibrated to 10 seconds.
• 2 Oiling Points for a direct lubrication of the Table for longer life & better performance.
• Can be clamped in Horizontal as well Vertical Position.
• Supplied with Dividing Plate Set for Indexing & a Tailstock. So a complete Indexing mechanism.

Item Code: NESRTD-150.4S
Description:

• Rotary Table Diameter :150 mm (6″)
• Overall Height : 80 mm ( 3-1/4″)
• Centre Height in Vertical Position: 105 mm
• Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees.
• Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is calibrated to 10 seconds.
• Centre Bore of the Table: 2 MT
• 2 Oiling Points for a direct lubrication of the Table for longer life & better performance.
• Can be clamped in Horizontal as well Vertical Position.
• Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution.
• Safety & Operation manual is also supplied.

Item Code: NEHVRT -150.3S
Description:

• Rotary Table Diameter :150 mm (6″)- 3 slots
• Overall Height : 80 mm ( 3-1/4″)
• Centre Height in Vertical Position: 105 mm
• Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees.
• Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is calibrated to 10 seconds.
• Centre Bore of the Table: 2 MT
• 2 Oiling Points for a direct lubrication of the Table for longer life & better performance.
• Can be clamped in Horizontal as well Vertical Position.
• Supplied with Dividing Plate Set for Indexing & a Tailstock for a total Indexing solution.
• Safety & Operation manual is also supplied.

Item Code: NEHVRT-150.3S
Description:

• Rotary Table Diameter :150 mm (6″)- 3 slots
• Overall Height : 80 mm ( 3-1/4″)

• Centre Height in Vertical Position: 105 mm
• Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees.
• Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds.
• Centre Bore of the Table: 2 MT
• 2 Oiling Points for a direct lubrication of the Table for longer life & better performance.
• Can be clamped in Horizontal as well Vertical Position.
• Supplied with Dividing Plate Set for Indexing 
• Safety & Operation manual is also supplied.