Rotary Tables & Accessories


3 Inches (75 mm) Rotary Table -3 Slots

Item Code: NERT-75.3
Description:

  • A Precision Small Rotary Table for Milling operation with Table Diameter – 3 Inches (75 mm) with 3 slots.
  • Height – 47 mm
  • Worm- Gear Ratio – 36:1, which basically means that 1 handle rotation shall turn the table by 10 Degrees.
  • Table graduated in 360 Degrees & the scale calibrated in 5 degree increment.
  • Centre Height in Vertical position is 52 mm.
  • Can be used in both horizontal & vertical position.




3 Inches (75 mm) Tilting Rotary Table

Item Code: NETRT-75.3
Description:

  • Designed to tilt between 0- 90 Degrees & can be locked at any position.
  • Table Diameter – 3 Inches (75 mm) 
  • Height – 47 mm
  • Worm- Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees.
  • Can be used both in horizontal & vertical position




4 Inches (100 mm) Rotary Table

Item Code: NERT-100.4
Description:

  • Designed for smaller milling machines.
  • Table diameter 100 mm
  • Table is graduated 360 Degrees.
  • Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
  • Center Height in vertical position: 2-1/16″ (50 mm apparox)
  • Hand wheel is graduated in divisions of 10 min & can be set to zero.
  • Can be mounted both in Horizontal & vertical position




4 inches (100 mm) Tilting Rotary Table

Item Code: NETRT-100.4
Description:

  • Features to tilts between 0- 90 Degrees & can be locked at any position.
  • Table diameter 100 mm
  • Table is graduated 360 Degrees.
  • Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
  • Center Height in vertical position: 2-5/8″ (66 mm approx)
  • Hand wheel is graduated in divisions of 10 min & can be set to zero.
  • Can be mounted both in Horizontal & vertical position




HV4 Rotary Table ( Table Diameter -110 mm)

Item Code: NERT- HV4.4
Description:

  • Table Diameter : 110 mm (4-3/8″)
  • Table Height: 80 mm (3 -1/8″)
  • Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees.
  • Centre Bore of the Table MT2
  • Table Graduated 360 Degrees. Handwheel graduated in seconds.
  • Vernier scale is caliberated to 10 seconds.
  • 2 Oiling Points for a direct lubrication of the Table for longer life & better performance.
  • Can be clamped in Horizontal as well Vertical Position.




HV6 Rotary Table (Table Diameter-150 mm)

Item Code: NERT-150.6
Description:

  • Rotary Table Diameter :150 mm (6″)
  • Overall Height : 80 mm ( 3-1/4″)
  • Centre Height in Vertical Position: 105 mm
  • Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees.
  • Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds.
  • Centre Bore of the Table: 2 MT
  • 2 Oiling Points for a direct lubrication of the Table for longer life & better performance.
  • Can be clamped in Horizontal as well Vertical Position.




Tailstock for HV4/5/6 Rotary Table

Item Code: NETRTH-456
Description:

  • Very Robust Quality Item in Cast Iron
  • Qualty Tailstock suitable for HV4, HV5 and HV6 Rotary Tables.
  • Maximum Centre Height: 105mm
  • Minimum Centre Height: 80mm
  • Base dimension 135mm x 90mm




Dividing Plates Set for HV4 & HV6 Rotary Table

Item Code: NEDPH-4.6
Description:

  • Set of 3 dividing plates designed to fit our HV4 & HV6 Rotary Tables.
  • Centre Hole of the Plate is 21 mm
  • No. of Holes in each Plate

  •           Plate A- 15, 16, 17, 18, 19, 20,
  •           Plate B- 21, 23, 27, 29, 31, 33
  •           Plate C- 37, 39, 41, 47, 49 

  • It is supplied with a brass stopper key, Bracket, Crank Handle & fixing screws.




3 Inches (75 mm) Rotary Table -4 Slots

Item Code: NERT-75.3
Description:

  • A Precision Small low profile Rotary Table for Milling operation with Table Diameter – 3 Inches (75 mm) 
  • Height – 44 mm
  • Worm- Gear Ratio – 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees.
  • Table scale is calibrated in 5 degree increment.
  • Can be used both in horizontal & vertical position.




HV4 Tilting Rotary Table (Table Diameter-110 mm)

Item Code: NETRT-110
Description:

  • Table Diameter 110 mm
  • Base Dimension – 175 mm x 145 mm
  • Horizontal Height- 125 mm
  • Centre Height in Vertical Position- 80 mm 
  • Tilting calibration from 0 – 90°
  • 2 fixed stoppers which stops the table in horizontal & vertical (90 Degrees) positions.
  • Handwheel has disengagement feature for free table rotation
  • Lubrication pins for worm and table oiling.
  • Worm Gear Ration 1:90, which means that the table will rotate 4 degree with 1 handle rotation. 




HV8 Rotary Table

Item Code: NERT- HV8
Description:

  • Rotary Table Diameter : 200 mm (8″)
  • Overall Height : 105 mm ( 4-1/8″)
  • Worm- Gear Ratio is 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees.
  • Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds.
  • Centre Bore of the Table: 3 MT
  • Can be clamped in Horizontal as well Vertical Position.




Back Plates with T-nuts & fixing Screws for Rotary Tables

Item Code: NEBPR-XXX
Description:

  • Excellent quality back plates to mount chucks on the Rotary tables.
  • Manufactured from tool Steel & ground finished.
  • Drilled in a manner that they fit both a 3 as well as 4 slot tables.
  • In case of MT taper bore Rotary tables, the back plates are provided with an extension to fit to the center bore so that the center of the Table and back plate remains absolute co-centric.

 Prod. Code    Plate Size  Suitable Rotary Size  Ext. Taper  Thread/ Recess for Chuck Mounting 
NEBPR-065  65 mm  75 &100 mm     — Unimat Thread- 14 x 1
NEBPR-080  80 mm 100 &125 mm    — No Thread. Recess to Fit Chuck’s recess
NEBPR-100  100 mm HV4  MT2 No Thread. Recess to Fit Chuck’s recess
NEBPR-125  125 mm HV4/HV5  MT2 No Thread. Recess to Fit Chuck’s recess
NEBPR-150  150 mm HV6  MT2 No Thread. Recess to Fit Chuck’s recess




5 Inches (127 mm) Rotary Table

Item Code: NERT-127.5
Description:

Description:

  • Rotary Table Diameter :127 mm (5″)
  • Overall Height : 87 mm ( 3-7/16″)
  • Centre Height in Vertical Position: 90 mm
  • Worm- Gear Ratio- 1:72, which means that the 1 handle rotation shall turn the table by 5 Degrees.
  • Tee -Slot width ( Top of the Table) : 12 mm
  • Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds.
  • Centre Bore of the Table: 2 MT
  • Can be clamped in Horizontal as well Vertical Position.






Round Vices for Rotary Tables

Item Code: NERRV- XXX
Description:

  • Made of high grade close grain caste Iron.
  • Designed to fit our 3″ (75 mm) & 4″ (100 mm) Rotary Tables.
  • The moving jaw has V-grooves to hold Round objects.
  •  Again these vices are drilled in a manner that these can fit to a 3 as well 4 slot table.
  • The Drills are counter bored to ensure that the fixing screws sets perfectly ensure perfect movement.

  Prod. Code    Dia. of Base    Jaw Width   Jaw Depth   Jaw Opening   Height 
NERRV-080 80 mm 54 mm 20 mm 32 mm 29 mm
NERRV-105 105 mm 77 mm 21 mm 40 mm 32 mm




Rotary Table 4 Inches (100 mm)- 3 Slots

Item Code: NERT-100.3
Description:

  • Designed for smaller milling machines.
  • Table diameter 100 mm
  • Table is graduated 360 Degrees.
  • Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
  • Center Height in vertical position: 2-1/16″ (50 mm approx)
  • Hand wheel is graduated in divisions of 10 min & can be set to zero.
  • Can be mounted both in Horizontal & vertical position




Tilting Universal Tailstock

Item Code: NETS-100
Description:

  • This high quality universal tailstock with variable centre Height is designed to suit our HV4/ HV5/ HV6 Rotary Tables.
  • the centre height is adjustable by lead screw & can be adjusted from minimum 40 mm to 95 mm maximum.
  • Featuring a pivoting centre.
  • The dead centre is induction hardened & precisely ground.




Tailstock for 4 Inch (100 mm) Rotary Table

Item Code: NETS-100
Description:

  • Manufactured from high quality close grain seasoned casting.
  • Minimum Centre Height: 75 mm. 
  • Maximum Centre Height: 95 mm
  • Base Dimensions: 50 mm x 120 mm 
  • Designed to suit 4″ (100 mm) Regular & Tilting Rotary Table.
  • The dead center is hardened & precision ground.





4 Inches (100 mm) Tilting Rotary Table-3 Slots

Item Code: NETRT-100.3
Description:

  • Features to tilts between 0- 90 Degrees & can be locked at any position.
  • Table diameter 100 mm
  • Table is graduated 360 Degrees.
  • Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
  • Center Height in vertical position: 2-5/8″ (66 mm approx)
  • Hand wheel is graduated in divisions of 10 min & can be set to zero.
  • Can be mounted both in Horizontal & vertical position




4 Inches (100 mm) Tilting Rotary Table-3 Slots with Dividing Plates Set

Item Code: NETRT-100.3N
Description:

  • Table Diameters: 100 mm
  • Features to Tilts between 0 – 90 Degrees & can be locked at any position.
  • Overall Height: 2-5/8″ (66 mm Approx.)
  • Centre Height in Vertical position (@ 90 Degree Tilt) is 3-3/8″ (86 mm approx.)
  • Centre Bore is MT2
  • Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds.
  • Worm gear ratio is 1: 72, which means that the table will turn 5 Degrees on one handle rotation.
  • Centre Bore of the Table: 2 MT
  • Can be clamped in Horizontal as well Vertical Position.
  • Supplied with a set of Dividing Plates along for Indexing. Its ASSORTS Exclusive !




2.75 Inches Inches Mini Rotary Table

Item Code: NERT-2.75
Description:

  • Our smallest mini Rotary Table for Milling operation with Table Diameter – 2.75 Inches (72 mm) 
  • Height :1.5 Inches (39 mm )
  • Tee Slot width : 6.5 mm
  • Worm- Gear Ratio is 1: 48, which means that 1 handle rotation shall turn the table 7.5 degrees.
  • Dimensions of the Base : 4-1/8″ x 3″ (105 mm x 75 mm)
  • Clamping slot centre distance is 92 mm
  • Designed specially for smaller operations like watch making or jwellery makers.

Note: We do supply clamp kits as well for this table




HV4 Rotary Table ( Table Diameter -110 mm)- 4 Slots

Item Code: NERT- HV4.4
Description:

  • Table Diameter : 110 mm (4-3/8″)
  • Table Height: 80 mm (3 -1/8″)
  • Worm Gear Ratio – 1:90, which means that 1 handle rotation shall turn the table by 4 Degrees.
  • Centre Bore of the Table MT2
  • Table Graduated 360 Degrees. Handwheel graduated in seconds.
  • Vernier scale is caliberated to 10 seconds.
  • 2 Oiling Points for a direct lubrication of the Table for longer life & better performance.
  • Can be clamped in Horizontal as well Vertical Position.




Small Lathe Tailstock for 3 Inches (75 mm) & 4 Inches (100 mm) Rotary Tables

Item Code: NESLT-34
Description:

  • Small Lathe Tailstock suitable for 3″ (75 mm) & 4″ (100 mm) Rotary Tables.
  • Very Robust quality tailstock in Caste Iron, the moving dead centre in EN31- hardened & ground
  • elegantly designed in a way that same tailstock suits to 3″ & 4″ Regular and tilting models of our Rotary Tables.
  • Pls see all the 4 pictures to understand the different positioning of this tailstock for different Rotary tables,




HV6 Rotary Table (Table Diameter-150 mm)

Item Code: NERT-150.6
Description:

Description:

  • Rotary Table Diameter :150 mm (6″)- 3 Slots 
  • Overall Height : 80 mm ( 3-1/4″)
  • Centre Height in Vertical Position: 105 mm
  • Worm- Gear Ratio- 1:90, which means that the 1 handle rotation shall turn the table by 4 Degrees.
  • Table Graduated 360 Degrees, Resettable Dial & Handwheel graduated in seconds. Vernier scale is caliberated to 10 seconds.
  • Centre Bore of the Table: 2 MT
  • 2 Oiling Points for a direct lubrication of the Table for longer life & better performance.
  • Can be clamped in Horizontal as well Vertical Position.




Adjustable Tailstock for HV8 Rotary Table- Hardened & Ground Point

Item Code: NEATHG-HV8
Description:

  • Quality Adjustable Tailstock for HV8 /8″ Inches Rotary Table
  • With ground finish to centre holder and slideways.
  • Very robust design in cast iron. Alloy Steel Hardened & Ground Point Center
  • Centre Height maximum – 215mm * Centre Height minimum – 130mm * Centre travel – 30mm
  • Base dimension – 190 x 150mm * Overall casting height – 205mm * Weight – 10kg

109 thoughts on “Rotary Tables & Accessories”

  1. Get information now. Some are medicines that help people when doctors prescribe.
    ivermectin online
    п»їMedicament prescribing information. Everything information about medication.

Leave a Comment

Your email address will not be published. Required fields are marked *