Milling Machine Holders & Attachments

Item Code: NESSH-R8
Description:

• The spring loaded head readily accepts saw blades from 1/2″ till 1″.
• The blades are firmly secured in position with Hex head screw.
• Rust resistant black oxidised finish in R8 Shank.

Item Code: NESSH-ST
Description:

• Mounted easily on a collet chuck or any other similar method of holding parallel shank.
• Spring loaded Mechanism
• Straight Shank 1/2″ (12.7 mm), Overall Length 2 -5/8″ ( 66.7 mm).
• Holds saw blade of bore sizes 1/2″, 5/8″, 3/4″, 7/8″ & 1″ of maximum thickness 3/16 Inches.

Item Code: NESSH-MTX
Description:

• The multi step head readily accepts saw blades of bore sizes 1/2″, 5/8″, 3/4″, 7/8″ & 1″.
• The blades are firmly secured in position with Hex head screw.
• Taper shank- MT3 (M12 thread in shank) & MT2 (M10 thread in shank).

Item Code: NESSH-SS
Description:

• Suits to small drill and lathe machine for holding small cutters.
• Cutter Holding Diameter: 16 mm & 5/8″
• Shank Size: 10 mm & 3/8″

Item Code: NESGC-165
Description:

The most recent exclusive development of ASSORTS Machine Tools Co. The various great salient features of this high quality product are as listed below:-

• Available in MT 2 & MT3 precisely Grounded Shanks.
• Hard & Ground HSS Cutting Tool Bit.
• Graduated scale showing the Circle Cutter Diameter readings for an easy setting & handy reference of our end users.
• Sturdy Setting of the Graduated scale & the HSS Cutting Bit by simply tightening the Allen screws provided along.
• Minimum Circle Diameter – 38 mm (1.5 Inches) 165

          Maximum Circle Diameter – 165 mm (6.5 Inches)

Item Code: NERTA-MXX
Description:

• A very versatile attachment designed for drilling machines for drilling through and blind holes/ drill with standard taps.
• The automatic reverse mechanism has a double back out speed and the adjustable friction clutch to avoid breakage of taps.
• Available in MT2 and MT3 shanks. 
• Offered  in different Tap Holding Capecities. Please refer to the Excel below :-

Item Code: NEMSDA-JT0
Description:

• Quality Tool Steel’s Micro Drill Adaptor (Sensitive drill adaptor) or can be called a miniature quill & is designed to drill small holes using a lathe, mill or pillar drill
• Sensitive Finger Control. Controls manual feed pressure very easily, which helps in preventing Drill breakage.
• Very well suited for making small holes with large machines.
• Shank is 1/2″ Straight.
• Comes with a small capacity of 0.3 to 4 mm JT0 Drill chuck.