Calipers


Wing Type Compass/ Divider

Item Code: NEWD-XXX
Description:

  • Manufactured from high quality carbon steel with a polished finish.
  • Points are hardened for increasing wear resistance.
  • Quick release & lock.
  • Used for scribing circle or arc in a layout work.

Prod. Code      Size (In Inches)   Size (In mm)
NEWD-100 4″ 100
NEWD-150 6″ 150
NEWD-200 8″ 200
NEWD-250 10″ 250
NEWD-300 12″ 300
NEWD-400 16″ 400
NEWD-450 18″ 450
NEWD-600 24″ 600




Inside Caliper

Item Code: NEIC-XXX
Description:

  • Manufactured from high quality carbon steel with a polished finish.
  • The legs are made from carefully selected flat stock with heat treated points for durability, and they pivot on a roller while the bow spring ensures a precise tension setting. 
  • Accurate adjustments are made by turning the knurled nut on the threaded rod.

Prod. Code Size (Inches) Size (mm)
NEIC-075 3″ 75 mm
NEIC-100 4″ 100 mm
NEIC-150 6″ 150 mm
NEIC-200 8″ 200 mm
NEIC-250 10″ 250 mm
NEIC-300 12″ 300 mm 




Jenny (Hermaphrodite) Caliper

Item Code: NEJC-XXX
Description:

  • Manufactured from polished tool steel.
  • Designed to locate the centre of a round or square section.
  • Also used for marking off a constant distance from an edge.
  • One leg holds an adjustable point & the other leg features a location lug.
  • Points are hardened to enhance wear resistance. 

Prod Code     Size (Inches)   Size (mm)
NEJC-100  4″ 100 mm
NEJC-150  6″ 150 mm
NEJC-200 8″ 200 mm
NEJC-456 4″, 6″ & 8″   100,150 & 200 




Outside Calipers

Item Code: NEOC-XXX
Description:

  • Manufactured from high quality carbon steel with a polished finish.
  • The legs are made from carefully selected flat stock with heat treated points for durability, and they pivot on a roller while the bow spring ensures a precise tension setting. 
  • Accurate adjustments are made by turning the knurled nut on the threaded rod.

 Prod. Code           Size (Inch)        Size (mm)  
NEOC-075 3″ 75 mm
NEOC-100 4″ 100 mm
NEOC-150 6″ 150 mm
NEOC-200 8″ 200 mm
NEOC-250 10″ 250 mm
NEOC-300 12″ 300 mm




Spring Calipers- Divider

Item Code: NESCD-XXX
Description:

  • Manufactured from high quality carbon steel with a polished finish.
  • The legs are made from carefully selected flat stock with heat treated points for durability, and they pivot on a roller while the bow spring ensures a precise tension setting. 
  • Accurate adjustments are made by turning the knurled nut on the threaded rod.
  • The design of these calipers, with their fine adjustment feature, ensures quick and positive settings when taking or transferring specific measurements.

Prod. Code       Size (Inches)      Size (mm)  
NESCD-075 3″ 75 mm
NESCD-100 4″ 100 mm
NESCD-150 6″ 150 mm
NESCD-200 8″ 200 mm
NESCD-250 10″ 250 mm
NESCD-300 12″ 300 mm




Wing Compass w/ Pencil Holder

Item Code: NEWC-XXX
Description:

  • Manufactured from high quality carbon steel with a polished finish & features a strong pivot point that will penetrate the wood surface.
  • The pencil holder at the tip of the leg ensures stability and accuracy, as well as making nearly any length of pencil usable.

Prod. Code  Size (Inches) Size (mm)  Will draw Circle
NEWC-200 8″ 200 Of Dia. 20″
NEWC-300 12″ 300 Of Dia. 32″




6 Pcs Telescopic Gauge Set Micrometer Measurement Bore (8 to 150 mm) Engineers Kit

Item Code: NETG-6S
Description:

  • 6pcs 8-150mm Telescopic Gauge Set
  • Micrometer Measurement Bore Engineers Kit
  • Material: Hardened tool steel
  • Size: As pictures shown
  • Under uniform spring tension, the plunger of the gage expand from the center to the diameter of the hole or width of slot being measured and then locked in place by a knurled knob, the hole size is found by measuring over the two contact point with a micrometer or caliper.
  • Features: – Double action rigid handle with self centering feature for quick checking of holes, slots and recess up to 6 inch deep – The ends of both contact are head treated stainless steel and precision ground to a radius to allow proper clearance on the smallest hole the gage will enter Package

          Included: 1x 6pcs Telescoping Gages




Wheel Type Vernier Caliper

Item Code: NEWVC-XX
Description:

  • Quality non digital vernier caliper- professional metric -imperial measuring system
  • Easy reading tools for checking inside, outside, depth & step measurements
  • Graduation on one side is 1/10 cm with 1/100 cm vernier. Graduation on other side is 1/16″ inches with 1/128 inch vernier
  • Measuring range upto 5″ inches & 12.5 cms . Caliper lock for repetitive measurements. Friction roller simplifies adjustments.
  • Available in stainess steel (amevc-ss) as well as non stainless steel body (code:amevc-nss)

107 thoughts on “Calipers”

  1. drug information and news for professionals and consumers. earch our drug database.
    ivermectin human
    Read information now. Some are medicines that help people when doctors prescribe.

Leave a Comment

Your email address will not be published. Required fields are marked *