Quick change Tool Post

Quick Change Tool Post Set-6 Pcs

Item Code: NEQTP-37

  • An extreme High Quality Alloy Steel Quick Change Tool Post , all parts hardened & Ground.
  • Comes in a set of 6 units including; 

  • a). Main Block size 58 x 58 x37 mm having 7/16″ (11.2 mm) bore.
  • b). 2 Standard Holders,
  • c). 1 Vee (Boring) Holder,
  • d). 1 Parting Holder &
  • e) . 1 spanner

  • Capacity of the tool Holders upto13 mm. 
  • This fits to all Myford ML7 series & similar Lathe machine, suitable for 90-115 mm Centre Height lathes.

Loose Holders for Quick Change Tool Posts

Item Code: NEQCLH-XX

  • Loose holders, whether Standard, Boring or Parting type for all our Tool Posts are also available.
  • Manufactured from Tool steel & are precisely grounded after heat treatment.
  • These are shipped only after being checked their interchangeability with the master block so that there are no quality issues when sold loose. 

T2 Tool Post Set Block Height 72 mm

Item Code: NEQTP-72

  • Quality Quick Change Tool Post made of Alloy Steel, all Parts are hardened & ground.
  • Set comes with below 6 units;  

  • a). The Main Block Size 97 x 97 x 72 mm, with centre bore 25.4 mm (1″) . 
  • b). 2 Standard Holder of Capacity 22 or 28 mm as per customer’s requirements.
  • c). 1 Vee (Boring) Holder of Capacity same as that of standard holder.         
  • d). 1 Parting Holder. (** ASSORT’s Exclusive)
  • e). 1 Spanner

Quick Change Tool Post Set

Item Code: NEQCTP-51

  • Quality Quick Change Tool Post made of Alloy Steel, all Parts are hardened & ground suitable for Lathes of 5″- 6″ (125- 150 mm) Centre Height.
  • Set comes with below 6 units;

  •          a). The Main Block Size is 73 mm (L) x 73 mm (W) x 51 mm (H). The Centre Bore is 5/8″ (16 mm), which reduces to 12 mm through the collar on Top. 
  •           b). 2 Standard Holder of Capacity 16 mm
  •           c). 1 Vee (Boring) Holder of Capacity 16 mm
  •           d). 1 Parting Holder of capacity 1/8″ x 3/4″
  •           e). 1 Spanner

Economy Quick Change Tool Post

Item Code:NEETP-90

  • Hardened & Ground oxidised Black Finish to support lathe height of 90 mm
  • Set comes with 2 standard holder of 1/2″ (12 mm) capacity.
  • Block Size – 2-1/4″ Length  x 2-1/4″ Width x 1-1/4″, (i.e. 58 mm x 58 mm x 32 mm) 
  • Centr Bore: 3/8″ ( 10 mm)

Mini Lathe Quick Change Tool Post Set

Item Code: NEQCTP-39

  • Mini Lathe Tool Post Set suitable for 4″ (100mm) centre height lathes
  • 2-Way Tool Post measures  2.45″ Wide x 3.45″ long (Incl. Holder) x 1.54″ high. (62 mm x 88 mm x 39 mm)
  • Set includes 2 standard Holders of capacity 12 mm, 1 Parting & 1 Vee Holder.

Quick Change Tool Post for CJ18A Series, C2 C3 Mini Model Engineering Lathes

Item Code: NEQCTP-30

  • A Quality addition to ASSORTS’s range of High Precision Engineering Tools. Our set is Hardened & Ground with Black Epoxy finish unlike other Tool Post’s available in the European, UK or USA market.
  • Block Dimensions – 50 mm x 50 mm ( & 61.5 mm including Dovetails where the loose Holder is fitted).
    • Length with Holder Attached : 76 mm
  • Overall Height: 30 mm
  • Through Bore in the Block is 10 mm 
  • Tool Capacity of the Standard Holder is 10 mm
  • The complete set comes with 1 Pc. Block, 2 Pcs. loose Standard holders, 1 Pc. Boring (Vee) Holder & a Parting Tool with Blade size 3/32″ x 1/2″ x 3-1/2″ (** Vee & Parting Holders are Exclusive & currently not supplied by other Exporters).
  • Compatible with C2 C3 Mini & Similar size Lathes. Also fits to CJ18A series bench Lathes.

Quick Change Tool Post Compatible to Mount on Myford & Mini Lathes

Item Code: NEQCTP-ST

  • Quality Quick Change Tool Post known as Swiss Type compatible for direct mounting on Myford Lathes
  • The Set includes 1 Block, 2 Standard Holders  of 12.5 mm capacity & 1 Boring Vee Holder 
  • When it will be mounted on myford ml/super 7, it will give you a center height of 10 mm . Even it will fit to a myford ml10 model as welll but give a 6 mm tool height. 
  • By doing small modifications, you can fit the same to a mini lathe as well.
  • Main block Dimensions: Height 32.5 mm high x 7/16″ bore 
  • Quick and better clamp cam action. Holders can be released by moving the handle.

118 thoughts on “Quick change Tool Post”

  1. Hello There. I found your blog the usage of msn. That is a really neatly written article. I’ll make sure to bookmark it and come back to read more of your useful information. Thanks for the post. I will certainly return.I have been surfing online more than 2 hours today, yet I never found any interesting article like yours. It is pretty worth enough for me. In my opinion, if all webmasters and bloggers made good content as you did, the internet will be a lot more useful than ever before.Excellent website you have here but I was curious if you knew of any message boards that cover the same topics talked about in thisarticle? I’d really like to be a part of community where I can getfeedback from other experienced people that share the same interest.If you have any suggestions, please let me know. Appreciate it!A big congratulations to you dear Osarhiaehimen, thank you for making us proud.Beautiful article. All true. Royal Isabela has so much to offer and such wonderful hosts who are willing to give you every backstory and show you the place with both pride and humility for Mother Nature’s grandeur. We have had the pleasure of knowing Stanley, Charlie, and our now departed dear friend and architect, David Pfaff. Theirpassion and gold standards shine through in everything they do and have done. Experiencing this place is believing!Spot on with this write-up, I seriously believe that this website needs a great deal more attention. I’ll probablybe back again to read more, thanks for the information!

  2. Ремонт посудомоек в Иркутске на дому.
    Ремонт от 30 минут. Выезд мастера на дом. Диагностика бесплатно. Скидка 15% за заказ с сайта + Скидки 25% на новые детали. Диагностика бесплатно. Сертификаты. Выезд на дом. Приятные Цены. Общая скидка 45%. Делайте заказ с сайта.

Leave a Comment

Your email address will not be published. Required fields are marked *