Lathes Tailstock Attachments


Lathe Tailstock Die Holder Set

Item Code: NETDH-04

  • An excellent threading solution available in both Metric & Imperial Die sizes.
  • Shanks are Hardened & Ground.
  • Available in MT1, MT2 & MT3 shanks.
  • Can hold Die sizes of 13/16″, 1″, 1-5/16″ & 1-1/2″. Holders can be interchanged very easily.




New Supreme Tap & Die Holder Set

Item Code: NETDH-N5

  • Can be called as a complete threading solution.
  • Can be used on Lathe, vertical milling & drill machines.
  • Available in MT1, MT2, & MT3 Hardened & Ground shanks.
  • Supplied with 3 fixing screws aligned with tapped holes in the Holders & body for secure attachment.
  • Comes with 4 Die holders of size 1-3/16″, 1″, 1-5/16″ & 1-1/2″ & 1 Drill chuck holder of thread size 3/8″ x 24 TPI

Note : Customer can advise their own thread size/ taper requirements basis their market for the drill chuck holder.




Sensitive Drill Attachment

Item Code: NESDA-XX

  • Developed by ASSORTS team & is exclusively available to us.
  • As the name suggests, designed & develped for holding and working with fine drills. The manual control on the drilling force helps reducing the breakage in fine holes with high accuracy.
  • Can fit to any lathe’s tailstock and is available in 2 & 3 Morse Taper.
  • The Front mounting can be provided by us with Taper or Thread for chuck mounting as required by any customer depending on his market needs.
  • Shank is precisely ground.

Prod. Code   Shank Morse Taper  Mounting For Chucks 
NESDA-2M 2 MT Available in B12, B1, JT0, JT2 or Any Thread for mounting Drill chucks (Metric Or Imperial)
** Current supply would be with JT2 drill chuck. 




Taper Turning Attachment

Item Code: NETTA-XX

  • One more item, an exclusive development by ASSORTS team and is available exclusive with us.
  • Much easier for doing a taper turning jon rather than going an old traditional way of offsetting the Tailstock.
  • The side screws are provided for easy and fine adjustments upto 6 Degree Left & Right.
  • Easily fits to a lathe Tailstock having 2 or 3 Morse Taper.
  • Shanks is precisely ground.

Prod. Code Shank Taper




Pin Type Tailstock Die holder Set

Item Code: NETDH-4P

  • Shank is hardened & ground and available in Morse Tapered 1 & 2 to fit into the Lathe Tailstock.
  • The set includes 4 different sizes of the Die Holders, interchangeable with same shank.
  • Provided with a pin that helps locking the die holder and allows about 1.5 inches travel.
  • Shipped in a wooden box packaging in a styrofoam casing.
  • Both Metric and Imperial size holders are available.
  • Die Holder Size 13/16″ , 1″, 1-5/16″ & 1-1/2″




Easy Tapping Attachment for Lathe Tailstock

Item Code: NEETA- XMT

  • A very versatile & High accuracy tapping attachment for lathe’s tailstock.
  • Ensures manual control for a straight parallel tapping as the chuck traverses while working
  • Avaialble in 2MT and 3MT shanks.
  • The front mounting is available in customised thread or taper options basis customer’s requirement as per his choice of mounting chuck




Revolving Centre MT2 shank with 3 Jaw 65 mm Chuck mounting for Lathes Tailstock

Item Code: NERC2C-65.3

  • Manufactured from hardened steel & fully precision ground for accuracy.
  • High quality ball bearings & taper bearing absorbs combined radial & thrusts load.
  • Guaranteed a smooth movement with high concentricity maintained.
  • The business end of the Live center has M14 x 1 thread, same as that of the mounting chuck.
  • It is perfect for Wood workers, auto electricians or any similar work holding jobs.




Revolving Centre MT2 shank with 3 Jaw 50 mm Chuck mounting for Lathes Tailstock

Item Code: NERC2C-50.3

  • Manufactured from hardened steel & fully precision ground for accuracy.
  • High quality ball bearings & taper bearing absorbs combined radial & thrusts load.
  • Guaranteed a smooth movement with high concentricity maintained.
  • The business end of the Live centre has M12 x 1 thread, same as that of the 80 mm 3 jaw mounting chuck.
  • It is perfect for Wood workers, auto electricians or any similar work holding jobs.




Tailstock Die Holder Set- Metric

Item Code: NETDH-06M

  • Excellent threading solution for Metric Die Sizes.
  • Shanks are Hardened & Ground 
  • Available in MT1, MT2 & MT3 Shanks
  • It can hold Die Sizes of 16 mm, 20 mm, 25 mm, 30 mm and 38 mm. 




Die Stock Holder for Small Mini Lathes

Item Code: NETDH-1M

  • Small Die Stock Holder for 1″ OD Dies. 
  • Can take larger or smaller dies with Adaptors.
  • Body of the die holder is knurles, so by gripping body by hand manually and allow Die to start. 
  • The Die Holder needs to be hold by hand when threading on the lathe.




Lathe Tailstock Die Holder MT1 Shank- Imperial Die Size

Item Code: NETDH-MT1

  • Small Tailstock Die holder suited to MT1 shank mini lathe.
  • The Head slides up and down on the shaft.
  • Perfect design for any machine with MT1 tailstock.
  • It can hold Die Sizes 13/16″ & 1″




Precision Lathe Tailstock Imperial Rigid Die Holder for threading Lathe Machine

Item Code: NERDH-04.N

  • Quality threading kit for your lathe machine available in morse taper MT3 shank’s tailstock
  • Made of quality tool steel. Shanks are precisely ground.
  • Much precise and accurate design with option of holding 4 imperial size round threading dies.
  • It can hold 13/16″, 1-5/16″, 1″ & 1-1/2″ round dies, through 4 holders (2 on each size of the main bodies that floats on the parallel shank). Sizes are laser marked on each holder for easy reference of the end user.
  • The morse taper goes inside your lathe’s tailstock taper & the body of the holder having threading die floats on the parallel part of the shank while creating threads on the round work piece hold in the lathe machine.




Supreme Threading & Tapping Attachment For lathe Machine


  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine
  • Used for threading and tapping purpose on the lathe machine
  • Die Holder Sizes 13/16″, 1″ & 1-1/2″ . Tapping Capacity of the Tap Wrench : 1/16″ to 1/4″ & 1/4″ to 1/2″
  • Comes in precisely ground MT1 ,MT2 and MT3 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck.
  • The Die for threading purpose is hold in the various Die holder sizes.
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the rotating job in the lathe’s chuck.

108 thoughts on “Lathes Tailstock Attachments”

  1. Plans & Pricing Read the bonus terms and conditons before you deposit money BTC or Bitcoin Cash and claim your first deposit bonus amount (free crypto). Feel free to take a look at Bitstarz Casino,, Casino or Katsubet Casino. Private Training Completing the CAPTCHA proves you are a human and gives you temporary access to the web property. That is one of many benefits of bitcoin, deals cannot be tracked, which often, facilitate professionals to keep completely anonymous. This is why the internet gaming industry features so quickly adopted for use from bitcoins. Another inherent advantage is that bitcoin allows professionals when deciding to take an excellent region inside on line playing as opposed to proper care from anywhere global. It is essential to pay attention and the choice of casino. Participate in the action is a licensed verified site. Unscrupulous operators often offer large charges on codes but set unfeasible conditions for their wagering. Choose the promotions which are profitable. Bitcoin gambling is on the rise because of its advantages over traditional payment methods, and Filipino players have recognized its convenience. In the first place, Bitcoin is a secure banking option since its wallets are protected against hackers. The possibility of fraudulent activities is much lower compared to other options. The Bitcoin gambling industry is growing rapidly. In just a few short years, it has gone from a niche market to a multi-billion dollar industry. This rapid growth is due to several factors, including the rise in popularity of Bitcoin, the increasing legalization of online gambling, and the advent of Bitcoin casinos. Playson has recently established themselves as leaders in the games development market by bringing out amazing video slot games like Art of the Heist and many more, we can determine its level of fairness and safety. The Wildcard is a jukebox that doubles any score if you have a winning line that uses it, darts is one of the oldest sports in the world. Overall, is crypto gambling legal in us according to numerous reports. The slot represents the battlefield where armor-clad knights and head-to-head against giant serpents, but rather learnt the rules from another bitcoin poker player in the 2022’s.

  2. Everything what you want to know about pills. Read here.
    ivermectin 250ml
    Prescription Drug Information, Interactions & Side. Learn about the side effects, dosages, and interactions.

Leave a Comment

Your email address will not be published. Required fields are marked *