Lathe Chucks & Adaptors

 

6″ Inches Wood Lathe Chuck Threaded 3/4 *16 with Independent & Reversible Jaws

Item Code: NEWC6-4.I
Description:

  • 4-Jaws x 6″/ 150 mm Wood Lathe Chuck Threaded 3/4″ x 16 with Independently Adjustable / Reversible Jaws
  • Hold round stock securely with this 4-Jaw 
  • Jaws are independently adjustable, and they can be reversed. Includes chuck key.
  • Graded Caste Iron body. Jaws are made of Alloy tool steel.

 

 

 

Wood Working Lathe’s Spindle Adaptors For Chuck Mounting

Item Code: NECAD-XX
Description:

  • Wide Range of Lathe’s Spindle Adapter for PSI & Similar wood working lathes to chucks or any lathe accessories.
  • Made of Quality Tool Steel.
  • This adaptor comes in various Bore Size & External Internal thread options
  • Adapts to your lathe’s Headstock or machine spindle to screw the small chucks
Code Internal Bore/ Thread Male Thread Remarks
NECAD-01 5/8 ” Plain Bore  M12 x 1 Adapts to 5/8″ Mark V PSI Woodworking lathe’s Spindle to mount Chucks having M12 x 1 mounting thread
NECAD-02 5/8″ Plain Bore M14 x 1 Adapts to 5/8″ Mark V PSI Woodworking lathe’s Spindle to mount Chucks having M14 x 1 mounting thread
NECAD-03 3/4″ x 16 TPI M12 x 1 Adapts to Woodworking lathe of Spindle thread 3/4″ x 16 TPI to mount Chucks having M14 x 1 mounting thread
NECAD-04 3/4″ x 16 TPI M14 x 1 Adapts to 5/8″ Mark V PSI Woodworking lathe’s Spindle to mount Chucks having M14 x 1 mounting thread
NECAD-05 1″ x 8 TPI M12 x 1 Adapts to Woodworking lathe of Spindle thread 1″ x 8 TPI to mount Chucks having M12 x 1 mounting thread
NECAD-06 1″ x 8 TPI M14 x 1 Adapts to Woodworking lathe of Spindle thread 1″ x 8 TPI to mount Chucks having M14 x 1 mounting thread
NECAD-07 5/8″ Plain Bore 1″ x 8 TPI Adapts to 5/8″ Mark V PSI Woodworking lathe’s Spindle to mount Chuck having 1″ x 8 TPI mounting thread

 

 

 

Woodworking Lathe’s Spindle Adaptors For Mounting Polishing & Buffing Wheels

Item Code: NEWLA-B.X
Description:

  • Lathe Spindle Adapter available to fit 5/8″plain spindle
  • This spindle adapter is bored in 5/8″ for the plain Shopsmith spindle and has a locking set screw.
  • The other end is threaded with 2 washers and a nut to tighten any buffing polishing wheel or any other similar accessory
  • Drilling Buffing Polishing Shaping on a Shop-smith Wood working lathe
  • Safety Note: It is very important that you securely fasten the spindle adapter to your lathe spindle, and any of your 1-8 threaded accessories to the spindle adapter. Failure to properly secure these components can result in injury
Code Internal Bore Size
NEWLA-B.1 5/8″ Plain Bore Inside
NEWLA-B.2 1/2″ Plain Bore Inside

 

 

 

Wood Working Lathe Spindle Adapter 5/8

Item Code: NEWLA-MA
Description:

  • Lathe Spindle Adapter to fit 5/8″ plain Shopsmith spindle
  • This spindle adapter is bored 5/8″ for the plain Shopsmith spindle and has a locking set screw.
  • The other end is threaded with a cap to tighten any buffing polishing wheel or any other similar accessory
  • Drilling Buffing Polishing Shaping on a Shop-smith Wood working lathe
  • Safety Note: It is very important that you securely fasten the spindle adapter to your lathe spindle. Failure to properly secure these components can result in injury.

109 thoughts on “Lathe Chucks & Adaptors”

Leave a Comment

Your email address will not be published. Required fields are marked *