Grinding Vices

Vices And Work Holding / By


Tool Makers Pin Type Vice

Grinding Vices

Item Code: NEPTV-XXX
Description:

  • Manufactured from selected tool steel. 
  • Fully tempered, Hardened & precision ground as per industry’s standards. We give hardness 58+/-2 HRC & We keep hardness to 58 +/-2 HRC & commit accuracy for squareness , flatness & parallelism within 0.005 mm.
  • Designed to provide maximum holding power & highly repeatable positioning due to their forward & downward clamping action.
  • “V” on moveable jaw for better gripping of round jobs

Prod. Code Jaw Width  Jaw Depth Jaw Opening Overall Height Overall Length
NEPTV-075 75 mm 35 mm 100 mm  65 mm  178 mm
NEPTV-095 95 mm 45 mm 125 mm  90 mm  235 mm
NEPTV-150 150 mm 48 mm 175 mm  95 mm  330 mm




Lead Screw Type Grinding Vice

Grinding Vices

Item Code: NELSV-XXX
Description:

  • Manufactured from selected tool steel. 
  • Fully tempered, Hardened & precision ground as per industry’s standards. We keep hardness to 58 +/-2 HRC & commit accuracy for squareness , flatness & parallelism within 0.005 mm.
  • Hardened clamping screw with square thread & gun metal nut to high performance & long life.

Product Code    Jaw Width   Jaw Opening  Jaw Depth  Overall Length 
     Inch        mm    Inch    mm      Inch    mm    inch    mm  
NELSV-060 2-3/8″ 60  2-3/16″ 55   15/16″  23  4-5/16″  110
NELSV-075 3″  75 3″ 75   1-9/16″  40   7-7/8″  200
NELSV-095 3-3/4″ 95   4-1/8″ 105 1-3/4″  45   9-1/4″  235
NESLV-150 6″ 150 6″ 150 1-7/8″  48  11-7/8″  302




Small Steel Vice 50 mm

Item Code: NESSV-50
Description:

  • The Jaws are 50mm Wide x 16 mm Deep.
  • Fixing Hole Centre distance in Length  x Widthwise direction is 40 mm x 25 mm respectively. It can be changed as per customer’s specific requirement as well.
  • Perfect to fit on a small vertical slide or any tee slotted base of any table.
  • Horizontal & vertical Vee in jaw (1 Side) to hold round job.




Grinding Steel Vice 60 mm Capacity

Item Code: NESGV-60
Description:

  • One of the most popular hardened & ground steel vice of 60 mm Jaw Width.
  • Jaw opening 50mm
  • Height horizontal 45mm
  • Height of body vertical 110mm
  • Dimensions 110mm x 85
  • Vertical & Horizontal Vees machined in Fixed Jaws.
  • Gun-metal bush has been provided for a long life & better performance.
  • Can be clamped in our Vertical slide. The fixing holes are milled accordingly. 




Grinding Steel Vice 88 mm Capacity

Item Code: NESGV-88
Description:

  • Another version of our hardened & ground steel vice with higher jaw width of 88 mm.
  • Jaw opening 53 mm
  • Height Overall 46 mm
  • Vertical & Horizontal Vees machined in Fixed Jaws.
  • Gun-metal bush has been provided for a long life & better performance.
  • Can be clamped in our Vertical slide. The fixing holes are milled accordingly.

Distance between counter bores- 40mm (Width-wise) & 50 mm (Length-wise)




Tool Makers Multi Purpose Vee-Block Vice

Item Code: NEVBV-125
Description:

  • Manufactured from selected tool steel.
  • Hardened & Precision ground.
  • Dimension of vice : 33 mm (Jaw Width) x 125 mm Long excluding the screw length.
  • Jaw Opening : 80 mm ( Without the removable Jaw) & 42 mm (with the removable jaw) 
  • Jaw Depth: 13 mm
  • Vee & clamp on reverse side will accept 35 mm diameter job




Taper Grinding Vice- Hardened & Ground

Item Code: NESGV-75
Description:

Item Code: NESGV-75
Description:

  • Hardened & Ground Steel Vice of 75 mm Jaw Width.
  • Jaw opening 55 mm
  • Jaw Depth 22 mm
  • Height horizontal 45 mm
  • Dimensions 135 mm x 75 mm
  • Vertical & Horizontal Vees machined in moving Jaws.
  • An additional piece for taper clamping has been provided.
  • Gun-metal bush has been provided for a long life & better performance.
  • Can be clamped in our Vertical slide. The fixing holes are milled accordingly. 




Precision 2″ Inches Quick Release Steel Vise For Micro Machining Milling Drilling Grinding

Item Code: NEQRV-50
Description:

  • Made of Quality Tool Steel.
  • Jaw Width: 2″ / 50 mm
  • Horizontal and Vertical V-grooves to hold any round stock
  • 1-1/2″ long x 5/8″ tall throat capacity
  • 3-3/4″ long x 2-3/8″ wide slotted base
  • Overall Dimensions: 2-3/8″ wide x 5-3/16″ long x 1-5/8″ tall
  • This is a great quality little vise for compact / micro machining