Multi Surface V-Block & Clamp Set
Item Code: NEMSVB-33
- Made of Tool steel hardened & precision ground all-angle V-block.
- Has a holding capacity of 1-5/16″ (33 mm). Other dimensions are 1-7/8″ x 1-7/8″ x 3-5/8″ , i.e. 48 x 48 x 92 mm (Height x Width x Depth)
- This all-angle V-block with clamp has parallel sides and central V to hold metal workpieces for grinding, milling, or drilling.
- Has 4 additional 3/8″ tapped holes are 16 tapped for angle non-clamping, 2 in base & 1 on each side.
Cast Iron Vee Blocks Pair
Item Code: NECVB-X
- Manufacturing from high quality caste Iron, seasoned to stress releived & ensure dimensional stability.
- Supplied in matching ground pair.
|Prod.Code||Width||Height||Thick||Width of Vee|
V Block Jig Fixture for Center Drilling of a Round Work-piece 2
Item Code: NEVJF-50
- It’s a very important and useful accessory for you Drill Press & Mills.
- It makes drilling through the center of a Round bar or tubing so easy.
- It also works great when you need to hold a Round work-piece for sawing.
- Measures 5″ Long x 4″ Wide.
- The V-capacity is 2″ (50 mm) maximum.
- The lengthwise T-slot width 10 mm gives the freedom of clamping it on any mill/ press easily.
- It is made of Graded Quality CI and much have higher strength than Aluminium version of it.
- Also our supply will have a Precise grounded V and base. The rest of the body shall be black painted.
Magnetic Vee Blocks
Item Code: NEMVB-XXX
- These V-Blocks are ideal for holding round or irregular shapes for majorly grinding, milling, drilling , measuring, machining and testing applications.
- All vee’s and faces can be magnetically energized or de-energised simply by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface.
- Vee’s are hardened 55-60 HRC for increased wear resistanc
- Supplied in matched pairs in fine finished wooden box.
|Item Code||Length||Width||Height||Big V Capacity||Small V Capacity|
Ultra Precision Working Block Pairs
Item Code: NEUPB-XXX
- Made of Quality Alloy Tool Steel Grade
- Comes in various sizes and desings.
- The squareness and parallelism is controlled well within 2-3 microns.
- Hardened , Matched Pair, Precision Ground , Even Chamferring on all 6 sides.
- These matched pair can be bolted through any plain hole to the tapped hole to use as a Steps blocks, feelers, Jigs, Angle plate, orientation and setting up tool.
|Product Code||Size of the Block||No. of Drill / Block|
|NEUPB-123.A||1″ x 2″ x 3″||0|
|NEUPB-123.B||1″ x 2″ x 3″||1|
|NEUPB-123.C||1″ x 2″ x 3″||23 (5 Tapped Drills Included 3/8″ x 16 TPI)|
|NEUPB-246.A||2″ x 4″ x 6||0|
|NEUPB-246.B||2″ x 4″ x 6″||1|
|NEUPB-246.C||2″ x 4″ x 6″||23 (5 Tapped Drills Included 3/8″ x 16 TPI)|