Swivel Precision Milling Machine Vices
Item Code: NESMV-XXX
Description:
- Made of close grain high tensile seasoned Cast iron.
- Screw spindle made of tool steel for long life & high performance.
- Fully hardened & ground tool steel jaws.
- Swivel Base is graduated 360 Degrees, in 1 Degree increment, so that vice can be set at any working angle in Y axis.
| Prod. Code | Jaw Width | Jaw Opening | Jaw Depth | |||
|---|---|---|---|---|---|---|
| Inch | mm | Inch | mm | Inch | mm | |
| NESMV-050 | 2″ | 50 | 2″ | 50 | 1″ | 25 |
| NESMV-075 | 3″ | 75 | 3″ | 75 | 1-1/4″ | 33 |
| NESMV-100 | 4″ | 100 | 4″ | 100 | 1-1/2″ | 38 |
| NESMV-125 | 5″ | 125 | 5″ | 125 | 2″ | 50 |
| NESMV-150 | 6″ | 150 | 6″ | 150 | 2-1/8″ | 53 |
Precision Milling Vices- 2 Way
Item Code: NE1WM-XXX
Description:
- Manufactured from close grain high tensile seasoned Cast iron.
- Positive locking to withstand heavy loads.
- Screw spindle made of tool steel for long life & high performance.
- Fully hardened & ground tool steel jaws.
- Horizontal swivel base is graduated 360 Degrees & Vertical swivel movement 90 Degrees.
| Prod Code | Jaw Width (Inches) | Jaw Width (mm) | Jaw Opening (Inches) | Jaw Opening (mm) | Jaw Depth (Inches) | Jaw Depth (mm) |
| NE1WM-050 | 2″ | 50 | 2″ | 50 | 1″ | 25 |
| NE1WM-075 | 3″ | 75 | 3″ | 75 | 1-1/4″ | 33 |
| NE1WM-100 | 4″ | 100 | 4″ | 100 | 1-1/2″ | 38 |
| NE1WM-125 | 5″ | 125 | 5″ | 125 | 2″ | 50 |
Precision Milling Vices- 3 Way
Item Code: NE3WM-XXX
Description:
- Manufactured from close grain high tensile seasoned Cast iron.
- Positive locking to withstand heavy loads.
- Screw spindle made of tool steel for long life & high performance.
- Fully hardened & ground tool steel jaws.
- Horizontal swivel base is graduated 360 Degrees in 1 Degree increement.
- Vice has 2 angular slides, one for 45 Degree tilting on both side and another for 90 degree vertical indexing.
| Prod. Code | Jaw Width | Jaw Width | Jaw Opening | Jaw Opening | Jaw Depth | Jaw Depth |
| (Inches) | (mm) | (Inches) | (mm) | (Inches) | (mm) | |
| NE3WM- 050 | 2″ | 50 | 2″ | 50 | 1″ | 25 |
| NE3WM-075 | 3″ | 75 | 3″ | 75 | 1-1/4″ | 33 |
| NE3WM-100 | 4″ | 100 | 4″ | 100 | 1-1/2″ | 38 |
| NE3WM-125 | 5″ | 125 | 5″ | 125 | 2″ | 50 |
Universal Machine Vise
Item Code: NEUMV-XXX
Description:
- Manufactured from close grained high tensile seasoned cast Iron.
- Screw spindle made of tool steel for longer life.
- Fully hardened & ground tool steel jaws.
- The swivel base is graduated 360 degrees in 1 degree increment. The 3rd angular slide with a moving axis allows any setting in 3D plane.
- Allows the work piece to set at any angle.
- Ideal for tool & cutter grinders.
| Prod. Code | Jaw Width (Inches) | Jaw Width (mm) | Jaw Opening (Inches) | Jaw Opening (mm) | Jaw Depth (Inches) | Jaw Depth (mm) |
| NEUMV-050 | 2″ | 50 | 2″ | 50 | 1″ | 25 |
| NEUMV-075 | 3″ | 75 | 3″ | 75 | 1-1/4″ | 33 |
| NEUMV-100 | 4″ | 100 | 4″ | 100 | 1-1/2″ | 38 |
Self Centering Machine Vice
Item Code: NESSC-XXX
Description:
- The Self Centering vice allows for accurate centering of jobs automatically. Perfect to perform a same operation at varying job sizes at a single setting.
- Manufactured from high tensile seasoned cast iron with fully hardened ( 55 +/-3 HRC) and ground tool steel jaws. Rotation of the crank handle automatically adjusts workpiece to the center.
- Spindle has opposite threads for quick & precise centering & then holding of the job.
- Fully graduated 360° swivel base allows the vice to be set at any angle along the vertical axis.
| Prod. Code | Jaw Width (Inch) | Jaw Width (mm) | Jaw Opening (Inch) | Jaw Opening (mm) | Jaw Depth (Inch) | Jaw Depth (mm) |
|---|---|---|---|---|---|---|
| NESSC-050 | 2″ | 50 | 2″ | 50 | 1″ | 30 |
| NESSC-075 | 3″ | 75 | 3″ | 75 | 1-1/4″ | 33 |
| NESSC-100 | 4″ | 100 | 4″ | 100 | 1-1/2″ | 38 |
| NESSC-125 | 5″ | 125 | 5″ | 125 | 1-3/4″ | 45 |
| NESSC-150 | 6″ | 150 | 6″ | 150 | 1-3/4″ | 45 |
Low Profile Self Centering Vice
Item Code: AVSCV- LXXX
Description:
- Manufactured from close grain caste iron with hardened & ground jaws having a horizontal and a vertical Vee cut to hold the round jobs.
- The Self Centering vice allows for accurate centering of jobs automatically. Perfect to perform a same operation at varying job sizes at a single setting.
- Spindle has opposite threads for quick & precise centering & then holding of the job.
| Prod. Code | Jaw Width (Inch) | Jaw Width (mm) | Jaw Opening (Inch) | Jaw Opening (mm) | Jaw Depth (Inch) | Jaw Depth (mm) | Height (Inch) | Height (mm) |
|---|---|---|---|---|---|---|---|---|
| NESCV-L050 | 2″ | 50 | 3-1/8″ | 80 | 1-1/8″ | 28 | 2-38/” | 60 |
| NESCV-L080 | 3-1/8″ | 80 | 4-1/2″ | 115 | 1-1/2″ | 38 | 3-1/8″ | 80 |
| NESCV-L100 | 4″ | 100 | 5-1/8″ | 130 | 1-1/2″ | 38 | 3-1/8″ | 80 |
2 Piece Milling Table Vise
Item Code: NEMV2- XXX
Description:
- Manufactured from close grain high quality casting.
- Jaws are Hardened & Ground.
- Maximise the work area of your milling table & get the maximum spindle to table clearance with this Vise.
- Work locates directly on the bed for extra rigidity.
- Machined key ways enables accurate set-up quickly.
| Prod. Code | Jaw Width | Jaw Depth | Key Slot Width | Clamp Travel | ||||
|---|---|---|---|---|---|---|---|---|
| Inch | mm | Inch | mm | Inch | mm | Inch | mm | |
| NEMV2-150 | 6 | 150 | 3 | 75 | 11/16 | 18 | 3/8 | 10 |
| NEMV2-200 | 8 | 200 | 3-1/4 | 82 | 13/16 | 20 | 5/8 | 15 |
Modular Machine Vice cum Slotted Table
Item Code: NEMMV-45
Description:
- Multi purpose 2 way axis Interchangeable machine modular vice cum slotted table.
- Details with Vice Assembly
- Jaw Width : 2″
- Jaw Depth: 1″
- Max. Opening: 2″
- Overall Height : 6″
- Details with Tee- Slotted Table Assembly
- Table Size : 4″ x 5″
- Overall Height : 5″
- Tee Slot Width : 5/16″